- Brand: EASE2U E
- Color: White Amber
- Light Source Type: LED
- Special Feature: Waterproof
- Voltage: 24 Volts
- Wattage: 20 watts
- Position: Unknown
- Lens Color: Amber
- Update Design : 24 led lights focused on one light, smaller, brighter
- Package Includes: 4X 24-LED Synchronous Strobe Light + 4X Protection Pad + Mounting Screws
- Patterns: 32 Different Flashing Patterns, Last pattern recall/memory function.
- Easy to install and durable. RED—TO Positive Pole; BLACK—TO Negative Pole YELLOW—Patterns Selector(The yellow touch black wire then release black wire)
- SERVICE—7 days no reason to return,180 days warranty .If it is defective, please contact with us directly.

































Matt M. –
The media could not be loaded. If you want good quality, and a super bright lights, spend the money and get these lights! Not only are they reasonably priced and don’t break the bank, but they are super bright compared to some of the other LED Amber lights I have gotten in the past. The wire used on these lights is good quality wire-probably 18 gauge, but compared to many of the other LED Lights out there and I have tried several, this company uses thicker quality wire and each light has probably 20+ inches of wire to work with making your life and the job much easier and friendly. Compared to the previous LED’s, I had mounted, I am getting “blinding” reactions whenever I show them off. In the video 1 light, is slightly dim, I reached out to the company and they apologized and advised they had a replacement on its way free of charge. To me, that says a lot about a company and the way they conduct business. I look to continue to do business with this company and believe they are in it for quality.I have not had any of the issues with moisture yet that I have read in some of the other reviews….but my intentions are to do the maintenance before it happens, so I intend to put an extra bead of silicone around each light before the first rain ever gets to them. I expect with reasonable care and caution, to get a long life out of these bright lights. If professionalism is what you’re looking for-get these!
Darrell Porter –
I bought these to use on a roadside response truck.When I tested them on the bench, they were bright in full sunlight conditions.They are easy to install with just three holes each – 2 for mounting screws and 1 for the wires.I did synchronize their operating patterns prior to installing them to ensure they all matched. While mine were in sync out of the box, it is a good idea to check just in case.Definitely a 5-star product.In the third picture from the back side, you will find a dot of black silicone seal on either side. This is waterproof covering for the screws which hold the lens on.I ran a bead of clear silicone around the perimeter of the lens to reduce condensation collecting on the inside of the lens.If you get condensation within the lens, dismount the lens by removing the black silicone over the lens screws, remove the lens, and wipe the lens thoroughly with an alcohol lens wipe. While the lens is off, turn the lights on for 10 minutes to heat the lamp assembly to cause any remaining water to boil off. Replace the lens assembly and use clear silicone seal to seal the lens to the light body and reseal the screw holes with clear or black silicone.
AR-NUT –
I wanted to wait till & get a video but I could never remember BUT I put these on my work truck which is a Med Duty Peterbilt with a 26 foot flatbed, I haul commercial roofing materials and equipment for a large roofing company. I ordered 1 set of these and installed all 4 on the rear of the flatbed and the very first morning I had a loose strap and had to pull over in the worst possible location on the interstate so I flipped my strobes on and immediately traffic started getting over and I knew then I had made the right choice. These are SUPER SUPER BRIGHT in the direct sunlight and 10 times brighter at night, and sometimes I have to block a lane of traffic to unload and just the regular hazard lights don’t cut it, so I bought another set and installed them on the front in the grill of my truck and now I feel a lot safer while I work.These are super easy to install and wire up, and Synchronizing them is a breeze, hey men swallow your egos and read the instructions and you will have no problems they are very detailed. I did take the precaution and sealed mine with a clear silicone so they should stay good to go. Now I want to get 2 more sets and install one on each side and I plan on doing so when I get a chance too.
maria –
okay
Shen –
Bought these for my husband and he loves it.
John –
I bought these stone lights to put on the back bumper of my Jeep. When off-roading in groups in the dirt, it can be hard to see the Jeep in front of you at times. These were bought to increase my visibility to anyone behind me. They will also work well if I am ever stopped on the side of the road. There are multiple patterns and speeds of the strobe function that is easy to select when installed. Once installed and turned on, these lights are very bright even in the daylight. I did add a bead of clear silicone to where the lens meets the base to keep water out. It appeared to be semi sealed t the factory, but not enough to keep condensation out. It was a simple safety fix that is well worth it considering the cheap price of these lights.
CATHY –
We received these in record time and they are very easy to install
Amazon Customer –
Simply awesome