- Brand: Partsam
- Color: White
- Light Source Type: LED
- Special Feature: Waterproof
- Voltage: 12 Volts
- Position: Inner
- Lens Color: Clear
- Lens Material: Polycarbonate
- 7″ Diameter round waterproof Led transit light 17 LED acts as backup/reverse light, marker light, running light etc.; Surface mount to trailer with mounting gasket; 3-Wire design hardwires to trailer; 4-hole surface mount with Inner reflectorized lens; Hole to Hole Mounting Space: 6-1/4″ Inch;
- Wire Connection Tips: White Wire – Ground, Red Wire – Backup/Reverse Light , Black Wire – Running/Marker Light;
- The light is DOT (Department of Transportation) compliant for street legal lighting making it a great choice for your light needs;
- The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board;
- Great for transit vehicles like School buses and refuge haulers, Also compatible with almost All automobiles and devices equipped with a 12-30 Volt DC power source such as Semi Truck, Semi Trailer, Service Truck, Bus, Service Van, Utility Truck, Enclosed Trailer, Utility Trailer, Boat Trailer, Parade Float, Horse Trailer, Utility Trailer, Pick Up Truck, UTE, UTV Peterbilt, freightliner, international ,Kenworth, mack and lorries etc.;




















![Outlet ✔️ 4pc 4" Round Red LED Trailer Tail Lights [DOT Certified] [Grommet & Plug Included] [IP67 Waterproof] Turn Stop Brake Trailer Lights For RV Trucks ????](https://www.headlight-store.com/wp-content/uploads/2022/12/51Etlov9VKL-247x247.webp)






Michael Kelly –
I installed one yesterday. The wiring was not the same gauge as the Trucklite one I pulled out. It wired up the same and had a nice gasket with it. The light was nice and bright and worked great. Only time will tell now. I will give any updates.
koz –
I followed wiring instructions and installed as replacement lights on my 93 intl Thomas School bus. On the Amber lights I put the red and black wires together since my bus has just one mode for the turn signal. Nice and bright.
Jackie –
Loved the lights for replacement on my vintage camper.
sgwyo –
I bought these to install on a 1966 camper with the same size original lights. Because I tow at 55 mph, I appreciate bright tail lights that warn faster traffic from a distance.I am happy to say they work well and I recommend them for especially for the size!
Bobbie –
These lights work for a vintage camper.
Stewart M. –
Well made
Becca –
Replaced our 2002 bluebird back turn signals with these. We opted to go for the bright option vs the dim option. You can see them very well in daylight so I can only imagine how bright they’ll be at night. I believe these lights come with 18 or 20 awg wires, I twisted & soldered then heat shrank the connections since bus wire was 12 awg. Screws were not included so I used metal to metal screws I already had and they worked perfectly.
Rick Love –
Great Lights same hole pattern as my old lights and simple wiring, they sure are bright.