- Item Dimensions LxWxH: 6.3 x 3.2 x 2.8 inches
- Brand: MICTUNING
- Color: Black
- Light Source Type: LED
- Position: Front
- Fit Type: Universal Fit
- Special Feature: Convenient use, Universal fit for curved or straight light bar, Waterproof, Snugly and stably keep in place, Easily wrap around, Exclusive designed, Simply and elegant look, Long lasting See more
- Material: Nylon
- Water Resistance Level: Water Resistant
- Remote Control Included?: No
- 2-IN-1 LED LIGHT BAR COVER – [Patent Pending] Exclusively designed in US, with a bit of elasticity on both ends, precise cut-outs and openings, universal for both 50 inch / 52 inch straight and curved led light bars
- NO MORE WHISTLE – Not only protects the lens from the burning sun but also reduces the annoying whistles the bar tend to make in driving, as well as makes your light bar be legal at some states!
- EXCELLENT PROTECTION – Made of premium Nylon material in the outer layer, the cover is water-resistant, windproof, dustproof, snowproof and low temperature resistant, well protects your expensive light bar
- EASY CLOSURE DESIGN – Adopts 1-inch wide nylon buckle, allows you to easily wrap around the entire light bar and attach with outdoor sticking tape! No Hassles of Pinching Buckles, Quiet Convenient!
- PREMIUM SOFT TEXTURE – Used super soft flannel in the inner layer with exquisite lining texture, it’s smooth to the touch and scratch-resistant to your light bar surface (PS: led light bar not included)
- SATISFIED DEFENDER – Buy with confidence, MICTUNING provides 30 days Money Back/Replacement Guarantee, Hassle-free 24-Month Warranty, Lifetime Customer Support, Timely RESPONSE within 4 hours































Shayne –
I’ve had no major issues with this cover. I’ve only had it fully on once (in order to get my vehicle through inspection) and it did what I needed it to do well enough. I will point out a couple of things to keep in mind, though:First, this thing is an absolute bear to put on. As I was on my own, I ended up having to take my roof off and stand on the front seats. This made it easier, but it was still difficult. Just the nature of the design. The Velcro holding it on is SUPER strong – once you get it installed, it isn’t going to blow off, which is a good thing. Getting it off was a little difficult, but it’s not like you’re putting it on and taking it off every day. I’m not in love with how it fits on either end of the light bar – the brackets get in the way a little. Not enough to effect performance, but enough that it wasn’t a “clean” look once installed. This was not a problem for me since I only needed it on for a couple of hours, but it’s something to consider if you plan to use it the majority of the time.Another non-issue for me that you may want to consider is that the description indicated it would help with wind noise. For me, it didn’t at all. Light bars are noisy, and the cover didn’t change anything.That all being said, it seems to be of high quality and it did exactly what I needed it to do, so full marks from me.
DJ UnEq –
So I bought a lightbar for my Jeep, not realizing it was going to cause such a noisy racket – so much so that it became undrivable. There was a clear plastic light cover that I wanted to get to help reduce the noise, but I couldn’t find anyone that would be able to ship it to me fast. So in the meantime, I found this cover which was shipped within a couple days and the price was right. Of course, I can’t use the lights at all with this cover on, however, I was at least able to drive my jeep on the highway without earplugs while I waited 2 to 3 weeks for my other light bar cover to come. Matter of fact, this light bar cover killed ALL of the noise I was experiencing.Now that I got my new clear – see through – light bar cover, I will still hold on to this one in case of theft, in case the new cover breaks, etc
Nicholas Clark –
Installing this was a bit of a chore, but it fits super snug and doesn’t flap around. One small-ish thing about installation is they apparently forgot about the wiring which turns the light on and off. My particular model has the somewhat thick wire casing going into the back of the light and bending the wire over and out the side of the light was tricky. Not super happy with having to bend the wiring over either, connections are where wires fail. Thinking of cutting a small notch in the velcro and fabric and then having the Mrs. sew up the edges. (I’ve no talent with sewing.)
Kendall McKnight –
Cheaply made. Threads hanging out upon opening package. For the price I am not surprised. The ends of the cover do not fit nicely around the attachment points of the light bar. Improve this and it would be a much better product and worth paying a little more for. Overall, it seems as though it will do what it was intended to do. It does reduce the noice coming off the light bar in the wind. Improve the fit and finish. After all, most of us keep lovers are use to paying more for a good product to improve our vehicles.
Charles N. –
The material is great, went on easy but it whips around in the wind a bunch while driving. Sounds like driving with a busted parachute on.
Jay –
Fit as I hoped and now my off-road lights are legal in Michigan
Matthew Giustiniano –
Fast service, easy to install but more like a thin water resistant material just held by velcro. Apparently first drive down the highway and i took off like a kite :(. Life is life huh? Lolol
Carlos d. –
Perfect item