- Item Dimensions LxWxH: 11 x 9 x 3.5 inches
- Brand: Nilight
- Color: Clear,White,Coffee
- Vehicle Service Type: Passenger Car, Bus, Motorcycle, ATV, SUV, UTV, Truck, Tractor, Trailer
- Voltage: 12 Volts
- Light Source Type: LED
- Position: Front
- Cover Included: 4PCS 18W led pods
- Fit Type: Universal Fit
- Material: Aluminum
- SUPER BRIGHT SPOT BEAM: High-quality LED chips emit bright white light; Concentrated spot beam illuminates to further distance
- ADJUSTABLE MOUNTING BRACKET: The pod can be adjusted to about 45 degrees, which makes changing direction of light beam easier
- WITHSTAND HARSH CONDITIONS: 6063 Die-cast aluminum alloy housing, clear and impact resistant PC lens, sturdy brackets
- WATERPROOF RATE: IP67; waterproof up to 3.3 feet of water for 30 minutes and effectively dustproof
- PACKAGE INCLUDES: 4PCS 18W LED Light Bars and Mounting Brackets





















Twindaddy –
The price is great – I received four of these for under $30. Light output is reasonable and the construction is pretty solid. I didn’t take any apart to see how well the LEDs are protected from heat (usually thermal paste and secured to the body), but I’ll assume they’re okay. Connected all four to a 12V source to test and all throw equal amounts of light and pattern. That’s good. With all four lit, they’re fairly bright. My intent is to use two in front and two in rear of a Sprinter, so these will be just fine.The negatives mentioned elsewhere are threefold:1. The leads are a bit short. I’ll have to add some shrink tubing when routing the wires into the vehicle. Not a huge issue.2. The mounting kits include some short bolts with lock and regular washers. This implies they should both be used, but the short bolts then don’t get enough threads to be secure. Since these screw into aluminum it’s quite easy to strip out a thread or two. I tossed the lock washers and all was fine, but I’ll look for slightly longer bolts for the final mounting.3. With the cable exiting the body on the side, it mostly blocks access to one of the mounting bolts. Nothing major, but a nuisance nonetheless.I’ll update this when I learn more about how they perform in the wet and over time.Update a year later: Though these still work fine, the hardware has started to rust and the exterior of the lights is pitted and faded. The ones I have in the garage, naturally, haven’t aged. I expect a more “known” brand stands up to the outdoors better.
Ryan B. –
The lights put out a lot of light. I installed them on the rear of my grasshopper mower.I would have given it 5 stars BUT, the washers supplied were way too small to mount the lights in the slider brackets. Be prepared to get larger washers (4 per light) at the hardware store. The supplied washers are too small and fall through the sliders.Not a big deal though. The lights are nice.
Dave –
I’ve used this for my reverse light on my 07 Kawasaki Brute Force and no one likes to be behind me when I back up. But I can see for about 50 or 60 yds bright as day. It’s been under water quite a bit and never had a problem working. Great product, Thanks
Luke –
These lights are decent for the price you pay. We used them on a piece of tillage equipment on the farm where we did not want to put super expensive LEDs. These did the job! I do wish they were not such a pain to assemble. You need someone with small fingers or a lot of patience!
Brett –
Ok, these are really inexpensive lights which is why it’s not 1 star. The have held up ok water wise in car washes. However today two of the lights ripped off and are unusable due to their design. If you get these, and I’m not saying you shouldn’t, please do the following:1) Do NOT over tighten anything. One bolt snapped with very little force. The Four small bolts are very weak, so just use Loctite and make them snug. The bold and nut that hold in the mounting piece to the light can bend the fins that hold it in place. So be careful.2) Use Loctite . Even the bolt that goes into the light that secures the mount. Loosen it a bit and use Loctite on it, or it will fall off if you go off-road.3) If you have a Jeep JL with LED lights, these will do nothing for you if you point them forward. They are not brighter than your lights on high. They work very well as train lights though, so either use them to light up more under you, or off to the sides (or even as reverse lights).
Alexis Oliveras –
En la caja vienen 4 las recomiendo muy buenas
Wilson Martínez –
HASTA AHORA DAN BATALLA ESTAN MUY BIEN
Chandler cook –
I’ve order 3-4 sets of these and never had a issue installing them in customers and personal vehicles.