- Brand: Torchbeam
- Light Source Type: LED
- Color Temperature: 6500 Kelvin
- Brightness: 40000 Lumen
- Fit Type: Universal Fit
- 6X Brighter Than Halogen: With 40000LM 100W per 9005 9006 combo kit,, 6500K cool white light, T5 9005 9006 LED bulbs light up the road clearly, you can see greatly even on rainy nights with wet pavement and road markets
- 1:1 Halogen Light Pattern: Our LED bulbs have same light pattern as halogen bulb but project further and wider white light without shadows or uneven patterns. Won’t blind oncoming drivers
- 5 Minutes Install, No Ballast: 9005/HB3 9006/HB4 LED lights are plug and play, with the driver incorporated into the bulbs. No extra cables and hanging parts. Installation can be finished in 5 minutes
- Extended Lifespan Over 5 years: T5 9005 9006 LED lamps feature built-in copper tube with condensate water, 12,000rmp cooling fan and 6063 aluminum body, which supporting the bulbs to work up to 50000 Hours
- Fit 99% Vehicles: High power allows our LED lights to birght greatly as well as to fit 99% of vehicle’s computers system. Reduce risk of error message, radio static or flickering occurred



















Marie Mojica –
Nice lights, bright, easy to install and not bad for the price but if u have a JEEP do not buy. I have a jeep grand cherokee 2008. I read a review about a jeep owner saying the lights were flickering and I thought “well maybe it has another issue that is making the lights flicker” but my lights flicker wherever I open or close my car with the alarm or any time the lights come on by themselves like opening the doors, but if I cut the lights on manually they stop flickering and work perfect. A little bit of an issue if you are a perfectionist with your car appearance.
BillG –
I replaced some headlights that were three years old that were led headlights with these. It was amazing to see the difference.I installed these in a very short amount of time and was very pleased with the brightness of these bulbs that light up the roadway.
Amazon Buyer –
It fits a 2004 Blazer with some modifications. The ring that goes into the socket has to be gyrated around until it fits the locking mechanism of the lamp socket. This way both LEDs face to the right and to the left.Also, make sure the 9006 lamp goes into the low beam (outside socket) socket and the 9005 into the high beam socket (inside socket), otherwise, they won’t fit.I had to slice off part of the back of the lamp structure for the lamp to fit. I am happy with the result.
Fieecfo –
These came in at HB4 9006 & HB3 9005 which was PERFECT fit for my Fleetwood Bounder 2006 on the Ford F53 Chassis. Holy Light Batman these are literally the best things ever no joke! 10 times brighter than my old halogen! Now we can see at night thank you!!!
Samuel leben –
Great buy for the price.
Shawn Nelson –
Package arrive promptly enough. Cool packaging well protected. Product looked awesome! Would be nice to have these clearly marked high beam or low beam bulbs even though they only fit in the corresponding headlight hole they belong to sew process of elimination works but small label, besides the part number I mean, would be nice.My main group with you is if I have any at all it would be this the plastic collar that locks into the keyed hole for the bulb hole in the headlight that plastic collar on each LED bulb is held in place by one very tiny Phillips head steel screw I realize this because after installing one of my valves it was tight as far as mounting was concerned but the whole bulb was jiggling for some reason I’m like that is not gonna be good driving down the road hitting bumps and my headlight is going all over the place. The problem is the screw was not tight on the plastic collar from the factory. Easy fix put a little drop of Loctite and tighten the screws carefully not to strip!Not that big a deal but should’ve came that way from the factory hope this helps someone! also they do provide extra O-rings for your bulbs so they fit tightly depending on your installation and vehicle type but it seem like even with those four extra O-rings I had to use to on two different bulbs for it to seat tightly. This worked fine and it’s still not an issue just putting it out there. Overall I’m happy customer
S.B. –
Let he who has two good ears and an empty belly suckle at the teat of wisdom. Only the light of truth shines brighter then my new headlights. The morning star shall bring wisdom and the knowing….they were a little pricey. The burned retinas of all who pass shall fragrance the air like BBQ. Hail Satan
Hamtoon –
excellent