- Material: Vinyl
- Brand: VViViD
- Size: 17.9″ x 60″
- Color: Clear Large Pattern
- Duration: 4 years
- NOTE: This product is built like a color change wrap and may be used on paint, trims and other projects as well as headlights and taillights.
- Color : High Gloss “Medium to light” tinted smoke with pulsing holographic effect, part of the 2020-2021 edition launch
- Micro Hex-tint refers to the size of the hexagonal pattern. It is half the size of the original hex tint by vvivid vinyl.
- New and improved vinyl formula developed in Canada reduces the risk of shrinking or peeling almost completely.
- Ultra-Clear Adhesive allows you to lift and reposition this tint multiple times without risking fingerprints, glue lines or marring. Dry application requires no messy liquids!









































A.Zarzycki –
The media could not be loaded. First time wrapping anything automotive, and I have less than a handful of newbie DIY mistakes (lifting at corner edges due to not stretching enough).That being said, the clear Bio HEX is subtle but gorgeous. One roll allowed me to do all my rear lights – uppers, lowers, and brake light.Vinyl doesn’t impact the visibility of my lights, and because of the lack of tint, I’m not running afoul of any laws.Application was surprisingly simple – repositioning, lifting, and stretching the film was easy and user-friendly. Very little heat needed to manipulate and stretch the film around curves, but you do still need a heat gun. I had no tearing or bubbles, but I did take my time (as you should) to be sure I was getting as good an application as I could for my first go.I can’t yet speak for how well it comes off, but will update this once I pull off the film to redo the sections that are lifting (again, 100% user/beginner error). But, even with the lifting, the film has remained intact and nothing has been able to get under it in the couple months I’ve had it installed.Watching professionals/videos, reading up on the process, having the right tools, and most importantly, having a lot of patience is what’s going to get you the best results if you’ve never worked with automotive vinyl before.Overall point: wonderful product, easy to work with, 10/10 would recommend and use again
Rodrigo Garcia –
The media could not be loaded. It was very easy to install on the headlights but remember they use a vinyl installation kit for 6 or 7 dollars and a heat gun, it is the first time I have done it and it turned out very well, when the installation is finished it heats the edges well so that adhere well otherwise it will lift when you see your car.
Nat –
I was a little worried about applying this after going through the reviews. It honestly was not that bad. It would have been easier if I had used a heat gun, but I applied it during the summer when it was around 100°F. It is not as stretchy / pliable as standard vinyl, so that is something to keep in mind. It looks great! I’ve had it on for about four months and it still looks the same as when I applied it.
Roastie –
The film is great looks good and adheres well!.
Anaiye Manuel –
Mounted on my fog lights. Really easy to use. If installed on lights that give off a decent amount of heat do expect some slight smoking of the lens wrap. That’s normal and is pretty much the light sealing the wrap to the lense. Don’t worry though you’ll be able to take it off later if need be.
Jason –
Sometimes I think the rainbow effect is to much but at the same time I don’t want to take it off, if your putting it on something all black it adds some character
Matthew –
First time trying the whole vinyl tint. Watched a video on how to do it and I probably wasn’t patient enough to do it, but I’ll be rebuying and retrying. Great product and the hex looks pretty cool in the daytime.
Donna –
I used this on the headlights of my golf cart to dim the brightness and it worked nicely. It even gave it a nice blue glow