-30%
Cheapest ???? Bio Pulse HEX+ Smoke Air-tint Headlight Taillight Tint Extra Large Roll (12″ X 60″) ????
Original price was: $13.99.$9.79Current price is: $9.79.
- Fast, friendly, always here to help.
- Quality products, fair prices.
- fast shipping
- Secure Shopping with Safe Payments
- NOTE: This product is built like a color change wrap and may be used on paint, trims and other projects as well as headlights and taillights.
- Color : High Gloss “Medium to light” tinted smoke with pulsing holographic effect, part of the 2020-2021 edition launch
- Unique hex cell pattern is embedded into the tint and not just printed on the surface. Never worry about fading or scratching off!
- New and improved vinyl formula developed in Canada reduces the risk of shrinking or peeling almost completely.
- Ultra-Clear Adhesive allows you to lift and reposition this tint multiple times without risking fingerprints, glue lines or marring. Dry application requires no messy liquids!
| Size | 12" x 60", 12" x 60" ( 2 pack ), 15.9" x 60", 17.9" x 60" |
|---|
8 reviews for Cheapest ???? Bio Pulse HEX+ Smoke Air-tint Headlight Taillight Tint Extra Large Roll (12″ X 60″) ????
Add a review
Related products
-30%
Original price was: $17.99.$12.59Current price is: $12.59.
-30%
Original price was: $9.99.$6.99Current price is: $6.99.
-30%
Original price was: $32.99.$23.09Current price is: $23.09.
-30%
Original price was: $12.99.$9.09Current price is: $9.09.
-30%
Original price was: $6.99.$4.89Current price is: $4.89.
-30%
Original price was: $17.99.$12.59Current price is: $12.59.
-30%
Original price was: $24.99.$17.49Current price is: $17.49.
-30%
Original price was: $19.99.$13.99Current price is: $13.99.
DeWayne Gates –
I was looking to add something different to the plexiglass on my gaming computer without taking away from being able to see the inside. Also was going to see if I could use it on my car but wasn’t sure about the laws with it so it didn’t take that chance. It’s a very good price for what you get because it is very easy to install without much skill involved and you can tell it’s not cheap material and also once you apply it it really looks better than what you can see on the pictures. I haven’t put it on a curved surface yet but plan on it sometime soon and I’m pretty sure it’ll probably be just as easy as putting it on a flat surface. All I had to do was clean the surface that I was going to install it on and then take a spray bottle with some soap and water mixture spray it on the surface and then peel off two edges of the material and get it started after lining it up and practically it unrolls itself with minimal bubbles showing up. Once I got it lined up correctly and got the bubbles pushed out that really were not a problem at all compared to putting anything on a cell phone screen, I took my heat gun which you can use a hair dryer as well and just lightly win over the area that I placed the material on to dry out any soap and it bonded really quickly and really didn’t have to put much heat to it and it became perfect. I would recommend using a razor/exacto knife/box cutter/etc.. to cut off any overages which cuts very well and easy for such a sturdy product. It really is see-through for the most part with a small smoky color to the material when you remove the paper backing but it doesn’t cover up or hinder light getting through.I suggest if you’re interested in it at all just get it cuz it’s not too expensive and experiment on something to see if you like how it looks because installing it won’t be a problem at all so the main thing will be just matching up the design to what you want it to enhance. As I find more things to apply this to I will be buying more as this is very good quality and also looks very good.
Dustin –
A few creases in the tight rounded corners. Not too bad for never doing vinyl on a rounded surface. Good from far, far from good though. The film DOES make the light slighy opaic, not as clear as I would have liked. HOWEVER, it does give the housings a little extra pop in the daytime. Overall I’m Happy with it, but next time I’ll be taking it to a guy who specializes in headlight wraps. Took me about 35 minutes on the first headlight and 25 on the second.
Justin –
Anyone who gave this film a bad review obviously just didn’t know what they were doing. This film is great! Forgiving, strong adhesion, and scratch resistant, what more can you ask for? Use a heat gun on low when applying, take your time, and use the right felt-tipped application tools when installing. Seriously a great product!
Angie Vee –
This product is pretty dope, it sticks well, you just have to be careful over stretching because the pattern will get all crazy.
Jose Estrada –
I flattened out the sections I was going to use, got them nice and warm w a heat gun so I wouldn’t have to deal w curves and stuff, never used soapy water or any liquids and I had no problems getting it wrap where Iplaced it. Very pleased w the ease of use of this wrap.
ivan felipe –
Excelente material, fácil de aplicar, cumplió las espectativas
JD Finch –
Looked good once we got it installed but wasn’t easy to install not very stretchy like a good wrap is.
Theo350z –
Love this product