- Brand: CAR ROVER
- Light Source Type: LED
- Color Temperature: 6000 Kelvin
- Wattage: 50 watts
- Item Package Quantity: 2
- 300% BRIGHTNESS: Using the newest LED chips(6 SMD and double-sided), each h1 LED headlight bulb can light up to 5000 Lumens, 6000K extremely bright cool white light with perfect beam pattern, 300% brighter than the stock halogen bulb, no dark spots or shadowed areas, not glare to oncoming traffic.
- ADJUSTABLE BEAM PATTERN: Besides the ultra-high brightness, our h1 LED headlight can be 360 degree adjusted and comes with removable adapter, you can easily mount this car h1 LED bulbs in the reflector or projector. Also, you can adjust the light angle, to get the perfect light output and correct beam pattern.
- EFFICIENTLY HEAT DISSIPATION: The h1 LED was built-in cooling fan and made of aviation aluminum lamp body, which keep the light get a better protection and performance in heat dissipation.
- EASY INSTALLATION: PLUG-N-PLAY. The heatsink part only has 20.2 mm length, fit for 95% vehicles. After installation, there’s enough space for the h1 headlight bulb breathing. Can be installed in 15-20 minutes by yourself.
- OVER 30,000 HOURS LIFESPAN: Last more than 30,000 hours. Works underwater! Rainproof driver, housing, and fan works even in extreme situations. NOTE: If your connector only has one pin, you may need the h1 male plug to make it fits.

























Al Golzari –
I don’t do many reviews but I’ll do one here if it helps some of you…since reading reviews helped me with my purchase decision.I was hesitant to buy any after market LED headlights, but was desperate, literally, since at least in NYC and NJ, the officials have turned off half the street and highway lights (and think we didn’t notice). So just wanted to state I bought these for genuinely practical reasons. I have a 2010 Mercedes C300 which I still want to keep and like, but is old enough to come with standard bulbs. I tried the brightest available standard bulbs (which are even more expensive than these) but still wasn’t satisfied.These are definitely brighter than the brightest standard bulb and if you have a C300 in the 2008-2014 these should work just fine without any dashboard lights coming on or flickering. You need to come up with a solution to mount them and I invented my own but that’s too complicated to get into here. But these DO fit inside and you can put the original dust covers back on and still have a little bit of clearance. Fit and compatibility with my car and not having lights on the dash were equally as important to me – as illumination.These do have some blind spots but I accepted that, since my car didn’t come with factory LED’s, and the fact they are brighter and you get longer and whiter illumination. I didn’t buy them for the aesthetics but I will say that they’re a nice white that looks really nice and doesn’t look “cheap.”I installed them in November. It’s now February so I can’t tell you how long they will last but I hope for a long time – so far, so good.UPDATE July 2021: These bulbs are still working well, since my initial review in Feb, 2021. One thing I’ll say – I’ve noticed that people continue to buy these bulbs and complain that the bulbs are supposed to work but that they don’t fit. *As I said in my original review above, I came up with my OWN solution for the mounting – so yes, you may have trouble with brackets, etc. (like I did at first, and why I made my own solution) but I think some people are getting confused. These are AFTER MARKET LED bulbs for people like me who have cars that came with standard bulbs originally. Be prepared to deal with bracket issues, etc. That’s just a risk you may need to take. Maybe I got “lucky…” but the bulbs are pretty good quality and bright white, I figured out a bracket solution, I have no error lights on the dash, and the bulbs do fit in my original headlamp sockets with enough clearance to put the original dust covers on. So I would recommend thinking about these issues when buying any after-market LED bulb.
Matthew Hartman –
Bought these for my 2000 Audi A4 in March 2021. Still working just as good as the day I installed them in the low beam housing. Much better light projection than stock halogen bulbs.
noone special –
I originally ordered a set of these lights, along with a set of adapters for a Honda CRV (shown in picture 1). While installing I dropped the ring, which comes with the LED lights. It was lost in the engine compartment and never found. I contacted the company, and they gave OUTSTANDING customer service!!!When I got the new parts from the company I decided to use a nitrile O-ring to hold things in place (shown in picture 2). Using this setup, these lights went in very easy.I only installed the low beams. Picture 3 shows the new low beam along with the original high beam (which looks yellow in the picture). Picture 4 shows the new light from farther back. WHAT A DIFFRENCE.I am VERY happy with these LED lights, and the FANTASTIC customer service.
E. Kizhnerman –
I had to 3D print some clip adapters and installed easily. I did not follow the instructions to install ring + adapter first. I found it easier just to insert the whole light in and then put the clip on. Make sure to have some zip ties handy to make sure that the hardware and cables are not loose and banging around. The stock dust cover fits fine and has a space for the fan to vent. The lights are good. Cannot talk about longevity as its only been a week.
D Harper –
May or may not be easy install dependent on your housing, also fan hums pretty loudly
Washington Rain Camper –
Aside from my sons car being a PIA to change the headlights as you have to remove the bumper and grill, I am very pleased with these lights! Very bright. Hopefully they last a long time.
William –
Me gustó lo simple que fue instalarlo, tuve que remover los faros delanteros pero la conexión es compatible con mi mazda y eso sirvió de mucho.