Coupon ???? Headlight Assembly Compatible With 1999-2002 Chevy Silverado 1500 2500/2001-2002 Chevy Silverado 1500HD 2500HD 3500/2000-2006 Tahoe Suburban 1500 2500 Headlamp With Bumper Lights B Smoke Bumper Lights Amber Reflector ????

8 reviews for Coupon ???? Headlight Assembly Compatible With 1999-2002 Chevy Silverado 1500 2500/2001-2002 Chevy Silverado 1500HD 2500HD 3500/2000-2006 Tahoe Suburban 1500 2500 Headlamp With Bumper Lights B Smoke Bumper Lights Amber Reflector ????

1. 

   Rated 4 out of 5

   Matt A. – May 4, 2021

   I am giving these 3 stars because they look great when they’re “right” which isn’t always…read on…It seems like these are hit or miss based on other reviews and my experience and you may get lucky and you may not. I did not. First off the aiming mechanism is terrible and basically non existent and you’ll most likely have to get creative (or lucky) to properly aim them. If you’re putting in LED bulbs you’re going to have to take the assembly apart to get the bulbs in and I’m not sure about halogen. The headlights for me did line up decently. Not great but well enough for me to work the pins into place. I got one side aimed well however the other side the headlight assembly is just not right and the entire assembly faces downward too much so no amount of adjustment will get the light where it should be and match the other side. I had to get creative and used about a 12 inch long piece of fuel line wedged on the bottom outside edge of the light between the light and the bezel (or the part of the grille that separates the headlights from the parking lights. Pushing up on the headlight and working that hose in there along the bottom managed to get the light where it needs to be and being a black hose with my black grille it blends in and is not noticed. It sounds fairly ghetto and I suppose it is but it looks fine and does the job. Great clear lenses highly increase the amount of light output which is great.The lower parking lights just plain don’t perfectly line up like OEM. If you’re familiar with the 2000-06 Suburban, Tahoe & Silverado you know that these parking lights don’t have the greatest design for retention and have pretty weak “clips” but OEM work well enough and stay in place with no issue. These ones just don’t properly light up and can’t be fully secured. You may THINK they are but then one day you’ll notice the inner side of either one is popped out. It does push right back in but because they just don’t line up you never get that “click” that assures it’s not going anywhere. For that reason it’s just become habit that every time I walk by the front of the truck I look and if one is popped out I just push it back in and it stays for a while again.I have not had any issues with water getting inside like a few reviews mentioned. Not yet at least and I will update this if that does happen.So if you want something that looks great all the time, fits great and easy to install you probably want to spend a bit more money on a different set.If you don’t mind having to get creative, making some mods, a bit of frustration and getting slightly ghetto to make it look great without spending much money then these may be for you.I initially was going to return them and spend the money on some others but then decided they will both LOOK the same and I had already done all of the “creativity” so I said ah screw it I’ll just save the money and work a little more for cool looks.The photos included are obviously before/after.

2. 

   Rated 4 out of 5

   Christian – August 19, 2022

   Headlights looks great . I installed the headlights at work on my lunch break . They aren’t hard to install but my led bulbs wouldn’t fit at first but I lossin the screws and put it in . It rained the day after I installed them and they do fog up and get some water in them but for the price it’s not bad .

3. 

   Rated 4 out of 5

   Nicholas Fudge – September 3, 2022

   Not the most perfect fit but not bad for the price, there are some holes on the headlights around the bulbs that have little mesh covers, i electrical taped over them & taped around the bulbs themselves to try and prevent moisture from creeping in. Aside from a little prep work they look great for the price!

4. 

   Rated 5 out of 5

   Evo – September 11, 2022

   I love the look of these lights, especially paired with LED’s and the 4/6 high mod. A friend of mine has bought a set of these for pretty much every GMT800 truck he’s ever had, and they always look fine. I on the other hand have went through 2 sets, and I’m on my 3rd. They just keep having issues with fogging up. I was using a silicone style sealer to try to remedy this, but after I got my hands on some of the rubbery kind that comes on a roll, I finally was able to seal them and keep moisture out. All in all, they work well, and look awesome. The fitment isn’t exactly OEM, but it passes, and it definitely updates the look of an older truck.

5. 

   Rated 4 out of 5

   Amazon Customer – October 27, 2022

   Passenger side headlight fitment was perfect, driver side unable to align the headlight with grill line. Spent a good amount of time on the adjustment, was unsuccessful. I figured the headlight housing itself was the problem. Overall great product for the value.

6. 

   Rated 4 out of 5

   Amazon Customer – November 17, 2022

   The price was affordable. They did need a lot of adjustment after installation.

7. 

   Rated 4 out of 5

   John R. Didier – December 2, 2022

   I had to use the back brackets from my OEM lights It was a bear but the effort for the price was worth it, I read a lot about these leaking and moisture build up inside I had mine for 3 months and they are great , look great and don’t get water in them ,in fact just went for a car wash today and they look fantastic

8. 

   Rated 4 out of 5

   Freddy – December 5, 2022

   These lights are beautiful and I love the pattern on the road. But…… I want to share some things with yall. First off, know that most cheap aftermarket things will never fit perfect. Once you are past that, I want you to know these lights require alot of patience!!!! Do not get angry and try to force things or they will snap. The light bulbs dont fit properly so you have to play with them until they fell snug. On the bottom lights,, i had to trim some plastic to snap into place.. My biggest battle were with the pins. You will have to be careful and patient. The lights were not centered and I was fine with that.It took me some time and alot of patience but it was worth it. I also had zero adjustment on one light. I had to manually set it. But that wasn’t too bad. If you aren’t patient… don’t buy these.If you want them to look 100 perfect, don’t buy these. I have an old beater and thats why I went through that much to install them. If I had a newer clean truck… I would go OEM