- Brand: LINKITOM
- Light Source Type: LED
- Special Feature: Waterproof, Submersible
- Voltage: 12 Volts
- Position: Rear
- Lens Color: Red
- Lens Material: Plastic
- HALO Trailer Light Kit : Trailer tail light kits has everything you need, includes two stop turn LED tail lights(Unique halo glow and solid light pattern design, different from other trailer taillights on the market), two amber clearance lights, one 22 feet and one 4 feet wiring harness, license plate bracket, 4pcs complimentary reflective sticker.
- IP68 Waterproof and Submersible: There is no screw on the lamp shade , the LED trailer lights are completely welded together, The circuit board of tail light is seal. A drain hole is designed to pull out all the water. This is to guarantee that water will not damage the diodes or circuit board. excellent tightness makes it be definitely waterproof and submersible.Please install the trailer taillights with the drain hole downwards.
- Compliant with DOT approved standards: The lamp shade of utility trailer light kit with corrosion resistant ABS material, 100% compliant with DOT approved standards
- 25ft wiring harness have more durable than the traditional copper coated aluminum wires and split Y-style color coded harness. Fully operable in inclement weather, these trailer lights are tough and durable for the long term.
- Widely Used: Widely applicable to 80 Inch width tractor, such as truck, trailer, boat, bus, lorry, van, caravan, snowmobile, etc. Please make sure wires connect correctly and no electronic short before underwater.















![Deals ✔️ 2pc 6" Red Oval LED Trailer Tail Light Kit [DOT FMVSS 108] [SAE S2TSI6P2] [Grommet & Plug Included] [IP67 Waterproof] [Stop Turn Tail] Trailer Brake Lights For Boat Trailer RV Trucks ⌛](https://www.headlight-store.com/wp-content/uploads/2022/12/51iHNf2xN2L-247x247.webp)



![Outlet ✔️ 4pc 4" Round Red LED Trailer Tail Lights [DOT Certified] [Grommet & Plug Included] [IP67 Waterproof] Turn Stop Brake Trailer Lights For RV Trucks ????](https://www.headlight-store.com/wp-content/uploads/2022/12/51Etlov9VKL-247x247.webp)

rvh752 –
Looks to be high quality, but boat side connector is a female fitting, which we don’t use in America. There are no double male adapters, so I will have to cut off the female fitting and replace it with a male fitting. This will give me four more connections in a section of line that sees a lot of handling. its a problem waiting to happen. Otherwise, it looks like a good product. I will see how it handles the water and how easy it is to find replacement lights when I lose one.
cato –
Went with others that said they were the best and higher priced, these last and for all you get in the package deal are tops. I ended up replacing my boat and jet ski trailer just so I wouldn’t have to do it later, even though I only needed to fix one trailer. I will get another set for my over the road trailer and possibly get them for gifts for my friends with trailers, they are that good. Visually they are easy to see day and night, the separation of turn, running and brake light make them always easy to see they are working.
Connie R. –
There are only few minor things which either were not good or I disliked. On one of the total 6 threaded holes couldn’t thread in the stud. When I looked closely I found that the plastic cover was slightly over the edge of threaded hole. So I used a small blade of my pocket knife and scrapped of the excessive plastic. That was sufficient to thread in the stud. The other three minor things I didn’t like are: the self threaded screws to attach ground wires were too small in diameter to self thread in heavy gage trailer frame; I have to use my quite larger screws with hex head to to that part of installation, I dislike not having more clips to secure wiring on the trailer frame and that the wire color of the side markers didn’t match the color of the wire to which it needs to be spliced. Because of all these so minor issues, all together I am knocking of one star.
Becky Herring –
Overall I really like this kit. My trailer was 21’ and the wiring reached about 2/3 of the way to the back of the trailer. So I hard to splice additional wire to make the run.The screws that came with it for the side lamps were cheap and slept breaking. I eventually used a self tapping screw from the hardware store.But the lights look great and appear to be well made. Overall I’m pleased.
Charles A Ramby –
none
james norton –
Product was packaged well. Directions were east to follow. Downside- no waterproof wire connectors.
Timothy Barton –
Lights were easy to install. Look great on my boat trailer. Like the brightness.
Jose Jaquez Jr –
well worth the money